Astoria Core 600 - Spare Parts; Decommissioning; Short Period of Machine Inactivity; Long Period of Machine Inactivity

TECHNICIANS' manual76 of 104
10. SPARE PARTS
To replace machine components and/or parts, refer to the of-
cialdocumentationprovidedbytheManufacturer.
All original spare parts are available from the Man-
ufacturer’s website. The Manufacturer can provide
a list of spare parts recommended for maintaining
the various versions of the machine on request.
If non-original parts are used, the safety of the
machine cannot be guaranteed. The Manufacturer
reserves the right to void the machine guarantee.
11. DECOMMISSIONING
11.1 Short period of machine inactivity
“Short period of machine inactivity” refers to a period of time
exceeding one working week.
If the machine is reactivated after this period, the Technician
must replace all the water contained in the hydraulic circuits
as indicated in para. "6.6 Water replacement" on page 49.
All the scheduled maintenance operations must also be per-
formed - see para. "10.3.1 Scheduled maintenance" on page
49.
11.2 Long period of machine inactivity
"Long period of machine inactivity" refers to a period of time
exceeding 30 working days.
In this case, the machine must be disconnected from the elec-
tric,hydraulicandgasmainsiftted,andalltheinternalcir-
cuits must be drained of water.
To connect the machine after this period, follow the initial in-
stallation procedure.
12. DISASSEMBLY
To disassemble the machine, follow the installation procedure
in reverse order - see chap. "5. INSTALLATION" on page 21.
All dismantled components must be divided by material to
makeidenticationeasierandthendisposedofattheautho-
rised collection centres, as instructed in chap. "13. DISPOSAL"
on page 76.
13. DISPOSAL
13.1 Disposal information
For the European Union and the European Economic Area
only.
This symbol indicates that the product cannot be disposed
of with household waste, pursuant to the WEEE Directive
(2012/19/EC), the Battery Directive (2006/66/EC) and/or the
national laws implementing those Directives.
The product should be handed over to a designated collection
point, for example the dealer when purchasing a new product
with similar features, or an authorised collection site that re-
cycles electrical and electronic equipment waste (WEEE), as
well as batteries and accumulators. Improper handling of this
type of waste can have negative consequences on the envi-
ronment and human health, due to the potentially hazardous
substances which are usually found in this kind of waste.
Your cooperation in correctly disposing of this product will
contribute to the effective use of natural resources and you
willavoidincurringnesprovidedbylaw.Formoreinforma-
tion about recycling this product, contact either your local
authority, the entity responsible for waste collection, an au-
thorised dealer or your household waste disposal service.
Before disposing of the machine, we recommend
seeking advice from the Technician and/or the
seller.
13.2 Environmental information
The machine features an internal lithium button battery,
which is located in the circuit board and ensures data storage.
Dispose of the battery in accordance with current national
regulations.