AT&T CLP99587 - Searching Directory Contacts

Directory
93
Search the directory
3-character alphabetical search
You can use the enhanced 3-character search to nd your contacts quickly
and eciently.
1. Follow the steps in Review directory entries on the previous page to
enter the directory.
2. When an entry appears, use the dialing keys to enter the letters associated
with the name (see page 90). You can enter up to 3 letters for the
search. The letters will show at the top le hand corner of the screen.
Aer you have entered one to three letters, the system starts searching in
the directory. If there is no name matching the letter(s) entered, the next
closest match in alphabetical order appears. If necessary, press

CID or

DIR on the handset, or qCALLER ID or pDIRECTORY on the telephone
base to browse.
Note: The cursor automatically moves to the next position 2 seconds aer you enter a letter. If you do not
enter another letter in the coming 2 seconds, the system starts searching in the directory.
Dial a directory entry
You can dial a directory entry on any line.
To dial a directory entry:
1. Search for the desired entry in the directory (see Review directory
entries and 3-character alphabetical search on pages 92-93).
2. When the desired entry appears, press # (pound key) repeatedly on the
handset or telephone base to show dierent dialing options.
3. When the displayed number is in the correct format, press HOME/FLASH
or /SPEAKER on the handset, or press HOME on the telephone base to
use the home line. Press CELL 1 or CELL 2 on the handset, or press
CELL 1 or CELL 2 on the telephone base to use the cell line.