Answering system
153
Using the telephone base:
Press /ANSWER ON to turn the answering system
on or o. If the answering system is turned on, it
announces, “Calls will be answered.” If the answering
system is turned o, it announces, “Calls will not be
answered.”
-OR-
1. When the telephone base is in idle mode, press
MENU to enter the main menu.
2. Press SELECT to select Answering sys.
3. Press qCALLER ID or pDIRECTORY to scroll to
Answer ON/OFF, then press SELECT.
4. Press qCALLER ID or pDIRECTORY to highlight On or
Off, then press SELECT to save the setting. You hear
a confirmation tone.
Note: If the answering system is off and there is an incoming call, the
system answers after ten rings and announces, “Please enter your remote
access code.” For more information about remote access, see page 168.
Answering system settings
Answering sys
Smart call blk
Directory
Caller ID log
p
q
SELECT
BACK
ANSWERING SYS
Delete all old
Record memo
Answer ON/OFF
p
q
SELECT
BACK
ANSWER ON/OFF
On
Off
p
q
SELECT
BACK
To Next Page
Loading...
