AT&T CLP99587 - Ringer Volume Adjustment

Telephone settings
40
Handset and telephone base settings
Ringer volume
You can set the ringer volume for incoming calls on all lines. A ringer o icon
shows when the volume is set to o.
1. Press MENU in idle mode to enter the main menu.
2. Press

CID or

DIR on the handset, or press qCALLER ID or
pDIRECTORY on the telephone base to scroll to Ringers, then
press SELECT.
3. Press SELECT again to select Ringer volume.
4. Press

CID or

DIR on the handset, or press qCALLER ID or
pDIRECTORY on the telephone base to sample each volume
level.
5. Press SET to save your preference. There is a conrmation
tone and the screen returns to the previous menu.
-OR-
1. Press qVOLUMEp on the telephone base to set the
ringer volume of the telephone base while it is in
idle mode.
2. Press SET to conrm and you hear a conrmation tone.
Notes:
f Changing the handset ringer volume does not affect the base ringer volume.
f If the ringer volume is set to off, that handset is silenced for all incoming calls.
f The ringer volume level also determines the ringer levels of intercom calls (page 74).
f If the ringer volume is set to off, the caller ID will not be announced and the screen will briefly display Caller ID
won’t be announced.
RINGERS
Ringer volume
Ringer tone
p
q
SELECT
BACK
RINGER VOLUME
p
q
SET
BACK
RINGERS
Ringer volume
Ringer tone
BACK S
BACK
SELECT
RINGER VOLUME
BACK S
BACK
SET