Answering system
159
Answering system settings
Recording time
You can set the recording time allowed for incoming messages. The message
length is three minutes by default.
To change the setting:
Using a cordless handset:
1. When the handset is in idle mode, press MENU to enter the
main menu.
2. Press
CID or
DIR to scroll to Answering sys, then
press SELECT.
3. Press
CID or
DIR to scroll to Ans sys setup, then
press SELECT.
4. Press
CID or
DIR to scroll to Recording time, then
press SELECT.
5. Press
CID or
DIR to choose 3 minutes, 2 minutes or
1 minute, then press SELECT to save the setting. You hear a
confirmation tone.
Using the telephone base:
1. When the telephone base is in idle mode, press MENU
to enter the main menu.
2. Press SELECT to select Answering sys.
3. Press qCALLER ID or pDIRECTORY to scroll to
Ans sys setup, then press SELECT.
4. Press qCALLER ID or pDIRECTORY to scroll to
Recording time, then press SELECT.
5. Press qCALLER ID or pDIRECTORY to choose 3 minutes,
2 minutes or 1 minute, then press SELECT to save the
setting. You hear a confirmation tone.
ANS SYS SETUP
Remote code
Msg alert tone
Recording time
SELECT
BACK
ANS SYS SETUP
Remote code
Msg alert tone
Recording time
BACK SELECT
RECORDING TIME
3 minutes
2 minutes
1 minute
BACK SELECT
SELECT
RECORDING TIME
3 minutes
2 minutes
1 minute
BACK
To Next Page
Loading...
Need help?
General
