AT&T CLP99587 - Change PIN; Cell Ringer

Bluetooth
35
Bluetooth setup
Change PIN
You are required to enter a PIN when establishing a Bluetooth connection.
The default PIN of your telephone base is 0000.
To change the PIN:
1. Press MENU on the telephone base in idle mode to
enter the main menu.
2. Press CALLER ID or DIRECTORY to highlight Bluetooth,
then press SELECT .
3. Press CALLER ID or DIRECTORY to highlight
Change PIN, then press SELECT . The telephone base
displays ENTER NEW PIN and the existing PIN.
4. Use the dialing keys to enter a new 4-digit code.
f Press X/DELETE to erase a digit.
f Press and hold X/DELETE to erase all digits.
f Press CALLER ID or DIRECTORY to move the cursor to the le or right.
5. Press SET to save.
Cell ringer
If this feature is on and you have connected an iPhone (iOS 4.1 or later) to
your telephone system, the telephone plays your iPhone ringtone when there
is incoming call.
1. Press MENU on the telephone base in idle mode to
enter the main menu.
2. Press CALLER ID or DIRECTORY to highlight Bluetooth,
then press SELECT.
3. Press CALLER ID or DIRECTORY to highlight Cell
ringer, then press SELECT.
f If there are more than one paired device on the
device list, press CALLER ID or DIRECTORY to
highlight the desired device, then press SELECT.
4. Press CALLER ID or DIRECTORY to choose On or O, then press SET.
Note: The quality of ringtone played on your telephone is subject to individual ringtone characteristics.
BLUETOOTH
Device list
Download dir
Change PIN
BACK SELECT
ENTER NEW PIN
0000
BACK SET
BLUETOOTH
Download dir
Change PIN
Cell ringer
BACK SELECT
CELL RINGER
On
Off
BACK SET