AT&T CLP99587 - Remove a Paired Device

Bluetooth
29
Bluetooth setup
Remove a paired device
When you already have a maximum of 4 devices on the device list and you
want to add another device, you must rst delete one from the list.
To remove a paired device:
1. Press MENU on the telephone base in idle mode to
enter the main menu.
2. Press CALLER ID or DIRECTORY to highlight Bluetooth,
then press SELECT .
3. Press CALLER ID or DIRECTORY to highlight Device list,
then press SELECT .
4. Press CALLER ID or DIRECTORY to highlight the desired
device, then press X/DELETE.
-OR-
f Press CALLER ID or DIRECTORY to highlight the
desired device, then press OPTION .
f Press CALLER ID or DIRECTORY to highlight Remove,
then press SELECT .
5. The telephone base displays Remove Headset X?
(Headset X represents the device name of your
Bluetooth headset). Press YES to conrm. The
telephone base displays Device removed from device
list and you hear a conrmation tone.
BLUETOOTH
Add device
Device list
Download dir
BACK SELECT
Headset X
Connect
Remove
BACK SELECT
Remove
Headset X
?
NO YES
Device removed
fro m
device list
DEVICE LIST
D1:Cell Phone X
D2:Headset X
BACK OPTION