Caller ID
101
Caller ID operation
View dialing options
Although the incoming caller ID log entries have ten digits (the area code plus
the seven-digit number), in some areas, you may need to dial only the 7 digits,
1 plus the seven digits, or 1 plus the area code plus the seven digits. You can
change and store the number of digits that you dial in the caller ID log.
While reviewing the caller ID log, press #
(pound key) repeatedly to show dierent dialing
options for local and long distance numbers
before dialing or saving the telephone number
in the directory.
Press 1 repeatedly if you need to add or remove
1 in front of the telephone number before
dialing or saving it in the directory.
When the number is in the correct format for dialing, press HOME/FLASH
or /SPEAKER on the handset, or HOME on the telephone base to call the
number using the home line.
-OR-
Press CELL 1 or CELL 2 on the handset or CELL 1 or CELL 2 on the
telephone base to call the number using the cell line.
Dial a caller ID log entry
1. When in the caller ID log, press
CID or
DIR on the handset, or
press qCALLER ID or pDIRECTORY on the telephone base to browse.
2. Press HOME/FLASH or /SPEAKER on the handset, or HOME on the
telephone base to dial the displayed entry using the home line.
-OR-
Press CELL 1 or CELL 2 on the handset or CELL 1 or CELL 2 on the
telephone base to dial the display entry using the cell line.
888-883-2445
1-888-883-2445
883-2445
1-883-2445
888-883-2445
1-888-883-2445
883-2445
1-883-2445
Press #
(pound key)
Press 1
To Next Page
Loading...
Need help?
General
