AT&T CLP99587 - Message Playback

Answering system
164
Message playback
If you have both new and old messages, you can play either new or old
messages. The caller ID information displays on the screens when you play
messages and you can call back the caller.
When playback begins, the handset and telephone base screens display the
message status, caller ID information, and time and date of the message
recorded. You hear the total number of messages followed by the day and
time of the message. Aer the last message, the telephone announces, “End
of messages.” and the screen displays End of messages.
To listen to messages at the telephone base:
Press /PLAY/STOP on the telephone base to listen to the messages.
f If there are new and old messages, press qCALLER ID or pDIRECTORY to
select Play new msgs or Play old msgs, then press SELECT or
/PLAY/STOP.
f If there are only new or only old messages, they will play automatically.
When the handset is playing a message, its screen shows [2]-Call info and
the caller’s name or number. If the caller’s information is unavailable, the
handset shows No caller info.
The system announces the number of messages, then begins playback. The
message sequence is shown on the telephone base. If there are no recorded
messages, the telephone base shows No messages and you hear, “You have
no message.”
To listen to messages on a cordless handset:
1. When the handset is in idle mode, press MENU to enter the main menu.
2. Press SELECT to select Play messages.
f If there are new and old messages, press

CID or

DIR to select Play
new msgs or Play old msgs, then press SELECT.
f If there are only new or only old messages, they will play automatically.
The system announces the number of messages, then begins playback.
The message sequence is shown on the handset. If there are no recorded
messages, the handset shows No messages and you hear, “You have
no message.”