AT&T CLP99587 - Options During Playback

Answering system
165
Message playback
Options during playback
When a message is playing, you can adjust the playback volume, skip, repeat,
pause or delete the message.
When messages are playing on the telephone base:
f Press q/VOLUME/p to adjust the message playback volume.
f Press /SKIP or SKIP to skip to the next message.
f Press /REPEAT or REPEAT to repeat the message.
f Press /REPEAT or REPEAT twice to hear the previous message.
f Press X/DELETE to delete the message.
f Press 2 to pause the playback and show the caller ID information.
– Press HOME or CALL to use the home line, or press CELL 1 or CELL 2 to
use the cell line to call back the caller. If necessary, press # (pound key)
or 1 to show dierent dialing options.
– Press CANCEL or BACK to restart the playback. If you do not call back
within 10 seconds, message playback restarts.
f Press /PLAY/STOP or CANCEL to stop the playback.
When messages are playing on the handset:
f Press

CID/VOLUME or

DIR/VOLUME to adjust the message playback
volume.
f Press SKIP to skip to the next message.
f Press REPEAT to repeat the message. Press REPEAT twice to listen to the
previous message.
f Press MUTE/DELETE to delete the message.
f Press 2 to pause the playback and show the caller ID information.
– Press HOME/FLASH, CALL or /SPEAKER to use the home line, or
press CELL 1 or CELL 2 to use the cell line to call back the caller. If
necessary, press # (pound key) or 1 to show dierent dialing options.
– Press OFF/CANCEL or BACK to restart the playback. If you do not call
back within 10 seconds, message playback restarts.
f Press OFF/CANCEL to stop the playback.