Telephone operation
64
Options while on calls
Equalizer
The equalizer feature enables you to change the quality of the audio to best
suit your hearing.
Using a cordless handset or the telephone base:
1. While on a home call or cell call, press OPTION.
2. Press
CID or
DIR on the handset, or press qCALLER ID or pDIRECTORY on
the telephone base to highlight Equalizer, then press SELECT.
3. Press
CID or
DIR on the handset, or press qCALLER ID or pDIRECTORY
on the telephone base to select Treble 1, Treble 2, Bass or Natural (the
default setting), then press SELECT.
Notes:
f If you switch the call between the handset and speakerphone by pressing /SPEAKER, the audio setting remains
unchanged.
f The current equalizer setting remains unchanged until you select a new setting.
Chain dialing
Use this feature to initiate a dialing sequence from the numbers in the
directory, caller ID log or redial memory while you are on a call.
Chain dialing is useful when you wish to access other numbers (such as bank
account numbers or access codes) from the directory, caller ID log or redial
list.
Using a cordless handset:
To access the directory while on a call:
1. Press OPTION.
2. Press
CID or
DIR to scroll to Directory, then press SELECT.
3. Press
CID or
DIR to scroll to the desired directory, then press REVIEW.
4. Press
CID or
DIR to highlight the desired entry or perform an
alphabetical search (page 93).
5. Press DIAL to dial the number shown.
To Next Page
Loading...
