111
Smart call blocker
About Smart call blocker
Call controls
f Smart call blocker is set to on, and to screen calls without numbers and
uncategorized calls by default. When Smart call blocker is on, the rst ring
of all incoming calls will be muted.
f If your directory, allow list, star name list and block list are empty when
Smart call blocker is on, all calls will be classied as unknown calls. The
telephone will screen all calls and ask callers to announce their names.
f If Smart call blocker is o, all incoming calls ring, including numbers saved
in the block list.
f If QUIET mode is on, and Smart call blocker is on and in screening mode, all
screened calls will be sent to the answering system aer screening.
Smart call blocker handles calls in the following ways:
Call category Call control
Welcome calls Allow
The telephone rings when there is an
incoming call with number saved in
your allow list or directory, but not in
your block list. Robocalls with caller
names saved in your star name list
will also ring.
Unwelcome calls Block
The telephone does not ring when
there is an incoming call with number
saved in your block list, and the call
will be rejected.
To Next Page
Loading...
Need help?
General
