141
Smart call blocker
Screen calls without numbers
f If the caller hangs up before the call is screened, or without leaving his/her name while the call is being screened, the call
will be logged as missed call in the caller ID log.
f While a call is being screened, you can press ANSWER, HOME/FLASH, CELL 1 , CELL 2 or /SPEAKER to stop
screening and answer the call.
f After the telephone screened a call, and is announcing the caller’s name to you, you can press OFF/CANCEL or
SILENCE to silence the ringer, or press BLOCK to reject the call directly.
f After you picked up a screened call and the telephone is announcing the screening option to you, you can press
OFF/CANCEL to hang up the call.
f If you receive a call waiting call without number while on a call, Smart call blocker will not screen the new call. You can
press HOME/FLASH, CELL 1 , CELL 2 or /SPEAKER to take the new call.
f Robocalls are unable to respond to the screening announcement, and therefore, will not get through and ring. If you want
to allow some robocalls to get through, save their names in the star name list. See page 129.
f The telephone can respond to remote access code while it is playing the screening announcement. This allows you to
access your answering system from an unknown number remotely. See Remote access on page 168.
Answer call once
1. When the telephone starts ringing, and the screen displays Screened call:
f On the handset, press HOME/FLASH, CELL 1 , CELL 2 , or
/SPEAKER to pick up the call.
-OR-
f On the telephone base, press HOME, CELL 1 or CELL 2 to pick up the call.
If you have turned on the caller ID announce feature, the telephone
announces “You have a call from...” and the caller’s name. Aer you picked
up the call, the telephone announces “To answer the call, press 1. To send
this call to the answering system, press 4. To repeat these options, press *”.
2. Press 1 to answer the call. The telephone number will not be added to your
allow list.
Notes:
f To turn on or off caller ID announce, see page 44.
f When the telephone is ringing, you can press SILENCE to mute the ringer temporarily.
To Next Page
Loading...
Need help?
General
