Telephone settings
42
Handset and telephone base settings
Set date/time
The answering system announces the day and time of each message prior
to playing it. Before using the answering system, set the date and time as
follows. If you subscribe to caller ID service, the day, month and time are set
automatically with each incoming call. The year must be set so that the day
of the week can be calculated from the caller ID information. You can turn o
the date and time settings of the caller ID service and set the date and time
manually (see Use caller ID to automatically set date and time on page
48).
Aer a power failure or handset registration, the system prompts you to set
the date and time.
To set the date and time manually:
1. Press MENU in idle mode to enter the main menu.
2. Press
CID or
DIR on the handset, or press
qCALLER ID or pDIRECTORY on the telephone base to
scroll to Set date/time and then press SELECT.
3. Press
CID or
DIR on the handset, or press
qCALLER ID or pDIRECTORY on the telephone base to
select the month, then press NEXT, or enter the number
using the dialing keys.
4. Press
CID or
DIR on the handset, or press qCALLER ID
or pDIRECTORY on the telephone base to select the
day, then press NEXT, or enter the number using the
dialing keys.
5. Press
CID or
DIR on the handset, or press
qCALLER ID or pDIRECTORY on the telephone base to
select the year, or enter the number using the dialing
keys, then press NEXT to move on to set the time.
6. Press
CID or
DIR on the handset, or press
qCALLER ID or pDIRECTORY on the telephone base to
select the hour, then press SAVE, or enter the number
using the dialing keys.
7. Press
CID or
DIR on the handset, or press
qCALLER ID or pDIRECTORY on the telephone base to select the minute,
then press SAVE, or enter the number using the dialing keys.
Set date
09/30/15
MM/DD/YY
K
S
Set time
05:41 PM
K
S
BACK
SAVE
BACK
NEXT
SET DATE
02/01/15
MM/DD/YY
p
q
NEXT
BACK
SET TIME
05:41 P M
p
q
SAVE
BACK
To Next Page
Loading...
Need help?
General
