AT&T CLP99587 - Conference Call Setup

Telephone operation
60
Conference calls
Conference home and cell calls
When you have calls established on the home and cell lines, you can create a
3-way conference.
To conference both home and cell calls:
1. Press OPTION on the handset or telephone base.
2. Press

CID or

DIR on the handset, or press qCALLER ID or pDIRECTORY on
the telephone base to highlight Conference.
3. Press SELECT . The conferencing device’s screen displays Conf.
To select an option while on a conference call:
1. Press OPTION on the handset or telephone base.
2. Press

CID or

DIR on the handset, or press qCALLER ID or pDIRECTORY on
the telephone base to highlight one of the following options:
f Hold
f End Home line
f End Cell 1/2 line
f Equalizer
f Caller ID log
f Directory
3. Press SELECT .
To end a conference call:
f Press OFF/CANCEL on the handset or HOME on the telephone base. You
can also put the handset back in the telephone base or charger.
Using the home and cell lines together:
f You can be on two dierent calls at the same time using the cell line and
home line with two handsets.
f You can be on a call using the cell line and a Bluetooth headset via the
home line at the same time.
f If you are on a call using the cell line, you cannot join the call using your
paired cell phone. However, you can join the call using another CLP99287/
CLP99387/CLP99457/CLP99487/CLP99547/CLP99557/CLP99587 device.
Your cell phone is being used for the phone call so only features that are
normally available during a call can be used.
f Press the same key at any time to switch back and forth between calls.