AT&T CLP99587 - Use Caller ID to Automatically Set Date and Time

Telephone settings
48
Handset and telephone base settings
Use caller ID to automatically set date and time
If you subscribe to caller ID service, the day, month and time
are set automatically with each incoming call. Follow the steps
mentioned below, to turn the CID time sync feature on or o.
The default setting is On.
1. Press MENU in idle mode to enter the main menu.
2. Press

CID or

DIR on the handset, or press qCALLER ID or
pDIRECTORY on the telephone base to scroll to Settings,
then press SELECT.
3. Press

CID or

DIR on the handset, or press qCALLER ID or
pDIRECTORY on the telephone base to scroll to
CID time sync, then press SELECT.
4. Press

CID or

DIR on the handset, or press qCALLER ID
or pDIRECTORY on the telephone base to highlight On or
Off, then press SELECT to save. There is a confirmation
tone and the screen returns to the previous menu.
p
q
SETTINGS
Clear voicemail
Key tone
CID time sync
SELECT
BACK
CID TIME SYNC
On
Off
BACK
SELECT
SELECT
SETTINGS
Clear voicemail
Key tone
CID time sync
BACK S
BACK
CID TIME SYNC
On
Off
p
q
SELECT
BACK
