AT&T CLP99587 User Manual

122
Smart call blocker
Call block settings
5. To edit the name:
f Use the dialing keys to enter characters.
f Press qCALLER ID or pDIRECTORY to move the cursor to the le or right.
f Press 0 to add a space.
f Press X/DELETE to erase a character.
f Press and hold X/DELETE to erase all characters.
f Press TONE to change the next letter to upper or lower case.
6. Press SAVE to conrm. The screen shows Saved to block list.
Delete a block entry:
Using a cordless handset or the telephone base:
1. Search for the desired entry in the block list (see Review block list on
page 117).
2. When the desired entry displays, press MUTE/DELETE on the handset or
X/DELETE on the telephone base. The screen shows Delete entry?.
3. Press YES to confirm. The screen show Entry deleted, and the next entry
displays. You cannot retrieve a deleted entry.
Note: If the call block list is empty aer an entry is deleted, the screen displays Block list is empty.
Delete all block list entries:
Using a cordless handset or the telephone base:
1. Press MENU in idle mode to enter the main menu.
2. Press

CID or

DIR on the handset, or press qCALLER ID or pDIRECTORY on
the telephone base to scroll to Smart call blk, then press SELECT.
3. Press

CID or

DIR on the handset, or press qCALLER ID or pDIRECTORY on
the telephone base to scroll to Block list, then press SELECT.
4. Press

CID or

DIR on the handset, or press qCALLER ID or pDIRECTORY on
the telephone base to scroll to Delete all, then press SELECT. The screen
shows Delete all in block list?.
5. Press YES to conrm. The screen displays Deleted. There is a conrmation
tone.

AT&T CLP99587 Specifications

General

Brand	AT&T
Model	CLP99587
Category	Cordless Telephone
Language	English