130
Smart call blocker
Call block settings
5. When the screen displays ENTER NAME, use the dialing keys to enter
a name (up to 15 characters). Press a key repeatedly until the desired
character appears. The rst character of every word is capitalized.
f Press qCALLER ID or pDIRECTORY to move the cursor to the le or right.
f Press 0 to add a space.
f Press X/DELETE to erase a character.
f Press and hold X/DELETE to erase all characters.
f Press TONE to change the next letter to upper or lower case.
6. Press SAVE to store your star name entry.
Review star name list:
Using a cordless handset or the telephone base:
1. Press MENU in idle mode to enter the main menu.
2. Press
CID or
DIR on the handset, or press qCALLER ID or
pDIRECTORY on the telephone base to scroll to Smart call blk,
then press SELECT.
3. Press
CID or
DIR on the handset, or press qCALLER ID or
pDIRECTORY on the telephone base to scroll to Star name list,
then press SELECT twice.
4. Press
CID or
DIR on the handset, or press qCALLER ID or
pDIRECTORY on the telephone base to browse through the
star name entries.
Note: Star name list is empty appears if there are no star name entries.
SMART CALL BLK
Bloc k list
Allow list
Star name list
SELECT
BACK
STAR NAME LIST
Review
Add new entry
Delete all
SELECT
BACK
To Next Page
Loading...
