AT&T CLP99587 - Page 31

Bluetooth
24
Bluetooth setup
6. Press NEXT to turn on the telephone base discoverable mode. The screen
displays Set cell to search base: AT&T DECT 6.0 PIN: 0000. Promptly
turn on the Bluetooth feature of your cell phone and search for or add new
devices.
7. Once your cell phone nds your AT&T phone (AT&T DECT 6.0), press the
appropriate key on your cell phone to continue the pairing process.
f Your cell phone may require a passcode. In this case, the telephone
base displays Check cellular. ENTER PASS CODE. Enter the cell phone
passcode (typically 0000) into the telephone base and press SET.
f Enter the PIN of the telephone base (the default PIN is 0000) into your
cell phone to continue the pairing process, if required. The telephone
base displays Adding Cell Phone Y (Cell Phone Y represents the device
name of your cell phone).
8. When a device is successfully connected, the telephone base displays Cell
Phone Y is added and connected to base and the corresponding status
icon (
1
or
2
) displays (Cell Phone Y represents the device name of
your cell phone). The corresponding device light on the telephone base
(CELL 1 or CELL 2/HEADSET ) turns on.
If you have trouble pairing your cell phone, it may not be compatible
with your CLP99287/CLP99387/CLP99457/CLP99487/CLP99547/
CLP99557/CLP99587. Check the Bluetooth compatibility list at
www.telephones.att.com/bluetooth.
Notes:
f The pairing process may take up to one minute. If the pairing process fails, try again.
f The steps for the pairing process may vary for different cell phones. If this happens, follow the prompts on your
cell phone and your CLP99287/CLP99387/CLP99457/CLP99487/CLP99547/CLP99557/CLP99587 to complete the
pairing process.
f Refer to the user’s manual of your cell phone on how to search for or add a new Bluetooth device.