Atlas Copco FOCUS 60 - Page 60

Programming Focus 60 / Focus 61 Focus 60 / Focus 61 User Guide
60 (106) 9839 0211 01 Edition 1.1
The Pset consists of the following parameters:
SETTINGS
FUNCTION
DESCRIPTION
Strategy
Hereunder is a list of available strategies:
 Torque controlled: Only the torque is measured.
The test result is OK if the maximum torque applied during the tightening is
within the torque limits:
 Torque controlled, angle monitored: Torque and angle are measured.
The test result is OK if the maximum torque applied during the tightening is
within the torque limits, and the angle is also within the angle limits:
Torque
Time
Maximum torque
Minimum torque
Torque
Angle
Maximum torque
Minimum torque
Min. angle
Max. angle