Atlas Copco HiLight B6+ Kd ESF User Manual

- 32 -
Units with Smart Mast™
4. Select MANUAL (1) in the Lighting menu of the
controller to ignite the lamps.
4.2.6.2 Switching off the floodlights
manually
To switch the lights off manually, follow the
procedure described below and proceed to lower the
mast.
Units with Lc1003™
1. Push the START button on the Lc1003™ module
(1) to shut down the lamps.
2. Place the 4 automatic switches (Q2-5) (2) in their
OFF position.
Units with Smart Mast™
1. Select OFF (2) in the Lighting menu of the
controller to shut down the lamps.
2. Place the 4 automatic switches (Q2-5) (2) in their
OFF position.
When the light tower is connected to
the mains (“External power input
(230 VAC), with battery charger”
option, S10 in position 2, see section
7.4.6.) all lights will ignite at the
same time, as soon as circuit
breakers Q2-Q5 are switched ON.
L
c
1003
0
1
MAN
AUTO
1
2
2
00_00_HiLight B6+_EN.book Page 32 Thursday, September 2, 2021 11:50 AM

Atlas Copco HiLight B6+ Kd ESF Specifications

General

Brand	Atlas Copco
Model	HiLight B6+ Kd ESF
Category	Lighting Equipment
Language	English