Copyright © 2007, 2008 AudioNote Kits
www.AudioNoteKits.com
audionotekits@rogers.com
Page 82
Section 11: Finishing Off
Fitting the Faceplate
Peel off the plastic and position and
secure with the 4 x M4x10mm black
CSK (countersunk or flat) screws
Tighten these with care, as you do not
want to let the screwdriver slip and
mark the faceplate.
Attaching the LED to the Faceplate
Secure the LED to the front of the
faceplate with the supplied BLU-TAK
supplied in the M2 power supply bag.
To Next Page
Loading...
