Setting ATW-R1440
67
4
Turn the control dial to select “On”/“Off” and press the control dial.
Item Details
On The indicator lamp lights.
Off The indicator lamp is always off.
The setting is complete.
Setting the indicator lamp (ATW-T1406/ATW-T1407)
You can change the color setting of the displayed indicator lamp.
With the ATW-T1407, configure this setting when using a gooseneck microphone with an LED.
When using a gooseneck microphone with no LED, select “Standard”.
When using a gooseneck microphone with an LED, select “Conference”.
1
Press the CH MENU button to select the channel to set.
Each press of this button switches the channel to set.
2
Turn the control dial to select “TX SETTING” and press the control dial.
3
Turn the control dial to select “LED” and press the control dial.
4
Turn the control dial to select “Standard”/“Conference” and press the control dial.
Item Details
Standard
When unmuted: Green
When muted: Red
Conference
When unmuted: Red
When muted: Off
The setting is complete.
Selecting “Conference” when using a gooseneck microphone with no LED will lead to noise.
Selecting “Standard” when using a gooseneck microphone with an LED will cause the LED of the
gooseneck microphone to always be on.
Setting the battery type (ATW-T1401/ATW-T1402 only)
Set the type of batteries used.
To Next Page
Loading...
