Setting ATW-R1440
66
Setting the mute mode (ATW-T1406/ATW-T1407)
1
Press the CH MENU button to select the channel to set.
Each press of this button switches the channel to set.
2
Turn the control dial to select “TX SETTING” and press the control dial.
3
Turn the control dial to select “MUTE MODE” and press the control dial.
4
Turn the control dial to select “Toggle” / “Touch to talk” / “Touch to mute” / “Disable” and press the
control dial.
5
If you selected “Toggle”, turn the control dial to select “Default mute” / “Default unmute” and press
the control dial.
Item Details
Default mute
The device starts muted when it turns on. The device switches
between muted and unmuted each time the talk switch is quickly
pressed.
Default unmute
The device starts unmuted when it turns on. The device switches
between muted and unmuted each time the talk switch is quickly
pressed.
Touch to talk The device is unmuted while the talk switch is pressed.
Touch to mute The device is muted while the talk switch is pressed.
Disable The device is not muted even if the talk switch is pressed.
The setting is complete.
Setting the indicator lamp (ATW-T1401/ATW-T1402)
You can change the lighting setting of the displayed indicator lamp.
1
Press the CH MENU button to select the channel to set.
Each press of this button switches the channel to set.
2
Turn the control dial to select “TX SETTING” and press the control dial.
3
Turn the control dial to select “LED” and press the control dial.
To Next Page
Loading...
