24. Program/PVR Replay Button: Press this button when
a PVR (personal video recorder) is in use, for replay of
recorded materials. Refer to your PVR’s owner’s manual
for more information.
25.
PVR List Button: When a PVR is in use, press this button
to list recorded materials. Refer to your PVR’s owner’s
manual for more information.
26.
Audio Button: In DVD mode, pressing this button accesses
the available audio soundtracks on a DVD. In some cases,
the disc may simply contain different languages. Other
discs may switch the audio format, e.g., to linear PCM or
Dolby Digital 5.1. Pressing this button may sometimes
provide access to commentary soundtracks.
27.
Subtitle/TV/Video Button: In DVD mode, press this but-
ton to select a subtitle language or to turn subtitling off.
When used with a video source device that is used for
obtaining television broadcasts, such as a cable box,
satellite receiver, TiVo, PVR, DVR or VCR, this button
allows you to select between the television signal or
one of the device’s video inputs. See the device’s owner’s
manual for more information on the use of this function.
28.
Remote Backlight Button: Press this button to activate
the remote’s backlighting for ease of use in darkened
rooms. The light will remain active for 7 seconds after
this button has been pressed, and will remain lit for an
additional 7 seconds after any other button on the
remote has been pressed.
29.
Macro M1/M2/M3 Buttons: Press one of these buttons
to store or recall a “macro” (a sequence of commands that
you may program into the remote). See the
Programming
the KP21R Remote/Macro Programming
section for
more information on programming and using macros.
30.
Sleep/PIP Move Buttons: Press this button to move the
PIP image, when available.
31.
Night Mode/PIP Channel Down Button: Press this button
to change PIP channel down.
32.
PVR Live Button: When a PVR is in use, this button switches
to play of the signal currently being received by the PVR.
See the PVR’s owner’s manual for more information.
33.
Remote Menu/PIP Channel Up Button: In System mode,
this button accesses the menu system for the remote
control, enabling you to program product codes, record
macros and perform other functions.
34.
Top Menu/PIP On/Off/PIP Swap/AM/FM Button: When
one of the AVR21EN internal tuners has been selected, or
when using an external tuner, press this button once to
toggle Tuner band. If an FM station is selected, the tuner
will toggle to AM. Press the button again to return to FM.
112
KP21R Remote Control Features
16. Preset/Page Down/Reverse Skip: This multipurpose
button has a different function, depending on the source
in use. When used with the tuner, this button scrolls
through the preprogrammed station presets. When used
with optical sources, such as an external DVD/CD player,
press this button once to return to the beginning of the
current track and again, quickly, to go to the beginning
of the previous track. The Page Down function is used
with cable and satellite television to page quickly
through on-screen menus.
17.
Volume Up/Down Control: To raise the volume, press
toward the top of the disc, where it is marked
⁄
Vol, and
to lower the volume, press toward the bottom of the disc,
where it is marked
¤
Vol. The left and right arrows on this
disc have different functions, depending on the source in
use. See
Channel/Slow Play Up/Down Control on in
this listing for more information.
18.
Tuning Down/Reverse Search Button: This button has
different functions, depending on whether the tuner
or another source is in use. Press this button when the
tuner is in use to change the station to one with a
lower frequency. Each tap of this button will decrease
the frequency by one increment. When an optical player
source (such as a DVD changer) is in use, press this button
to search quickly in reverse through the current track or
chapter. Depending on the type of disc used in the DVD
changer, each additional press will cycle through the
available scan speeds.
19.
Record/Stop/Pause Transport Controls: These buttons
are used when the remote is programmed for a compatible
DVD, CD or tape player. Pressing these buttons will transmit
a stop, record, or pause command, according to the capa-
bilities of the player being controlled.
20.
Status/Setting Buttons: This button has different
functions, depending on which device is in use. Press it
to display an external DVD recorder’s status. For DVRs
and game consoles, this button performs the Back
function. For some PVRs/DVRs, this button performs the
Instant Replay function.
21.
Disc Skip Up/Down Button: Press the top half of the
button to select the next available disc on a DVD/CD
changer (from the disc currently selected). Press the
lower half to select the previous disc (to the currently
selected disc).
22.
Random Play Button: Press the top half of this button
when a music player (CD, MP3 player or music server
that has this command available) has been selected to
have the player select and play tracks from all available
tracks, in random order.
23.
Repeat Play Button: Press the lower half of this button
when a DVD/CD, MP3 player or music server has been
selected, to access the Repeat functions. You may repeat
a chapter, track, title, disc, file or programmed playlist.
To Next Page
Loading...