Source Control
Radio 1 & 2
Keypad
A. Press Menu .
B. Press
Entertain .
C. Press
Radio 1 or 2 .
D. Press
FM for FM stations.
E. Press
AM for AM stations.
F. Press
‹
Auto Tune
›
to search for the next station with
an acceptable signal.
G. Press
‹
Preset
›
to select from up to 30 AM or FM
preset stations as configured in the AVR21EN.
Press
‹
to select the previous preset. Press
›
to select
the next preset.
H. Press
Back to return to ENTERTAINMENT.
I. Press
Menu to return to MAIN MENU.
Remote
A. Press Radio 1 or 2 .
B. Press
AM/FM to select band.
C. Press
Tune
‹‹
or Tune
››
to manually select station
frequency. Each press of
Tune
‹‹
or Tune
››
will
increase/decrease the frequency by one increment.
D. Press
Preset I
‹‹
or Preset
››
I to select from up to 30
AM or FM preset stations, as configured in the AVR21EN. Press
Preset I
‹‹
to select the previous preset. Press Preset
››
I
to select the next preset.
E. Press
Direct and within 5 seconds, enter the station
frequency by pressing the
Alphanumeric Keys .
NOTE: When direct tuning a station over 100MHz, when you
first press the “1” button, “10” will be entered. For example,
to tune 106.7, press 1, then 6, then 7.
Disc 1, 2 or 3 (DVD)
Keypad
A. Press DISC 1, 2 or 3 .
B. Press PAUSE/STOP to pause or stop a disc.
C. Press PLAY to play a disc or resume play, if disc is paused or
in Scan mode.
D. Press
‹
DISC
›
to select a disc when using a disc changer.
Press
‹
to select the previous disc, then press
›
to select
the next disc.
E. Press I
‹
SKIP
›
I to skip chapters or tracks. Press I
‹
once
to return to the beginning of the current chapter/track. Press
I
‹
twice quickly to return to the previous chapter/track. Press
›
I to advance to the beginning of the next chapter/track.
F. Press
‹‹
SCAN
››
for high-speed reverse or forward play.
Press
‹‹
for high-speed reverse play. Press
››
for high-
speed forward play. DVD players will have multiple scan speeds
that can be activated with successive presses of the
‹‹
SCAN
››
Buttons . The scan speeds will vary by device and brand.
To escape Scan, press PAUSE/STOP or PLAY .
G. Press
Back to return to ENTERTAINMENT.
H. Press
Menu to return to MAIN MENU.
134
System Operation
Multiroom System Operation
Multiroom
This section provides an overview of how to operate the W.H.E.N.
system from a Remote Room using both the KP21 keypad and
KP21R remote control. This overview will detail a typical system,
as set with factory defaults. There are many, almost infinite,
variations that can be configured, given the W.H.E.N. system’s
capabilities, so there may be some differences between systems.
If you have any questions regarding the operation or performance
of your system, please contact the system integrator who did the
installation and setup. For information regarding Main Room oper-
ation, see
Main Room Operation.
Power On
Keypad
Press the Power Button .
Remote
1. Press the On Button .
2. Press any
Input Selector Button .
Power Off
Keypad
Press the Power Button .
A. To turn off only the local zone, after pressing the
Power Button
,
do nothing or press
This Keypad .
B. To turn off the remote zones in the same Entertainment Group,
press
Ent Group Off .
C. To turn off all Remote Zones, press
All Keypads Off .
D. To turn off the entire system, press
Entire System .
Remote
Press the Off Button .
Volume Control
Keypad
1. Press the Volume
⁄
/
¤
Buttons .
2. Press both
Volume Buttons to mute/unmute.
Remote
1. Press the Volume
⁄
/
¤
Buttons .
2. Press the
Mute Button to mute/unmute
SOURCE SELECTION (Entertainment)
Keypad
1. Press Menu .
2. Press
Entertain .
3. Select a source from the menu .
Remote
Press an Input Selector Button .
To Next Page
Loading...