Figure 63.
Name Wake-Up Groups Screen
This section names the Wake-Up Groups. Building the groups will
be done in a later section. To name Wake-Up Groups:
1. From ZONE SETUP PAGE 1, with the cursor next to NAME
WAKE-UP GROUPS, press the
Set Button H. The NAME
WAKE-UP GROUPS screen will appear (
Figure 63).
2. Press the
⁄
/
¤
Navigation Button F to position the cursor next
to NAME. Press the
Set Button H. A white rectangle will flash
to the right of NAME: indicating that the remote can be used to
enter the letters for the group name.
3. Using either the
⁄
/
¤
Navigation Button F or the
Alphanumeric Buttons , enter the first letter for the group
name. (e.g., Master Suite). When the first letter appears on
screen, press the
›
Navigation Button F to move the cursor
to the next letter position.
4. Repeat Steps 2–3 above until the Wake-Up Group Name has
been spelled out. A Group Name can have up to 12 letters.
Press the
Set Button H. This will store the name and return
the cursor back to the arrow next to NAME.
5. To name additional groups, press the
⁄
/
¤
Navigation Button
F
to position the cursor next to GROUP. Press the
‹
/
›
Navigation Button F to select another group.
6. Repeat Steps 2–4 until all desired Wake-up Groups have been
named. Up to eight Wake-Up Groups can be created.
To exit Setup, press the
Exit Button G. To continue Zone Setup,
position the cursor next to BACK TO ZONE SETUP and press
the
Set Button H. ZONE SETUP PAGE 1 will appear.
Name Sleep Groups
Sleep Groups set scheduled times to shut down specific zones or
groups of zones. This is a convenient feature for turning off the
Patio Zone at a predetermined time, as not to disturb the neigh-
bors, or for managing systems if zones are turned on and then left
alone.
NOTE: It is not necessary to set a Sleep Group for a Wake-
Up Group. Wake-Up Groups have a preset duration for activity
before they shut off automatically.
Figure 62.
Name Entertainment Groups Screen
This section names the Entertainment Groups. Building the groups
will be done in a later section. To name Entertainment Groups:
1. From ZONE SETUP PAGE 1, with the cursor next to NAME
ENTERTAINMENT GROUPS, press the
Set Button H. The
NAME ENTERTAINMENT GROUPS screen will appear
(
Figure 62).
2. Press the
⁄
/
¤
Navigation Button F to position the cursor next
to NAME. Press the
Set Button H. A white rectangle will flash
to the right of NAME: indicating that the remote can be used
to enter the letters for the group name.
3. Using either the
⁄
/
¤
Navigation Button F or the
Alphanumeric Buttons , enter the first letter for the group
name (e.g., Livingroom). When the first letter appears on screen,
press the
›
Navigation Button F to move the cursor to the
next letter position.
4. Repeat Steps 2–3 above until the Paging Group Name has been
spelled out. A Group Name can have up to 12 letters. Press the
Set Button H. This will store the name, and the cursor will
appear next to NAME.
5. To name additional groups, press the
⁄
/
¤
Navigation Button
F
to position the cursor next to GROUP. Press the
‹
/
›
Navigation Button F to select another group.
6. Repeat Steps 2–4 until all desired Entertainment Groups have
been named. Up to eight Entertainment Groups can be created.
7. To exit Setup, press the
Exit Button G. To continue Zone Setup,
position the cursor next to BACK TO ZONE SETUP and press
the
Set Button H. ZONE SETUP PAGE 1 will appear.
Name Wake-Up Groups
Wake-Up Groups allow multiple zones or groups of zones to be
automatically turned on at predetermined times. Wake-Up is
good for use as an “alarm clock,” with the added luxury of being
programmable for any of the common sources (e.g., a zone can
turn on to the local TV News channel for traffic and weather or
stock reports, first thing in the morning). Wake-Up can also be a
good home security feature by programming different zones to
come on at different times with different sources to make a vacant
home look occupied.
To Next Page
Loading...