141
Appendix
SOURCE AUDIO INPUT AUDIO MODE AUDIO TYPE VIDEO INPUT DISPLAY TYPE
Disc 1 Coaxial 1 Logic 7 Music 5.1 Auto Plasma
Disc 2 Coaxial 2 Logic 7 Music 5.1 Auto Plasma
Disc 3 Optical 2 Logic 7 Music 5.1 Auto Plasma
Radio 1, 2 N/A Logic 7 Music 5.1 Auto Plasma
A/V AUX Optical 1 Logic 7 Music 5.1 Auto Plasma
VR Analog Logic 7 Music 5.1 Auto Plasma
Cable/Sat Analog Logic 7 Music 5.1 Auto Plasma
Game/Cam Analog Logic 7 Music 5.1 Auto Plasma
8 Ch DVD 8 Ch DVD Audio Logic 7 Music 5.1 Auto Plasma
System Defaults
The three tables in this section show the factory default settings
for the Audio and Video Inputs, Video Sources and Video Display
Aspect Ratios. These tables give you the complete picture on the
AVR21EN’s initial settings. You may then decide whether any item
needs to be changed so that it is more appropriate for your specific
installation. Any of the settings shown may be changed, as shown
in the pages of the AVR21EN Configuration section of this manual.
Table 1: Input Defaults
FEATURE DISC 1, 2, 3 RADIO 1, 2 VR A/V AUX CAB/SAT Game/Cam
Enhance Level 32 N/A 32 32 32 32
Noise Reduction OFF N/A OFF OFF OFF OFF
X-Color Suppressor ON N/A ON ON ON ON
DCDi Interpolation ON N/A ON ON ON ON
Film Mode Detect ON N/A ON ON ON ON
Film Mode Edit Detect ON N/A ON ON ON ON
Fleshtone Noise Red ON N/A ON ON ON ON
Composite Video Enhancement ON N/A ON ON ON ON
VCR Sync Time Enhancement ON N/A ON ON ON ON
Input Aspect Ratio 4:3 N/A 4:3 4:3 4:3 4:3
Brightness 100 N/A 100 100 100 100
Contrast 100 N/A 100 100 100 100
Saturation 100 N/A 100 100 100 100
Table 2: Video Source Defaults
DISPLAY TYPE ASPECT RATIO
CRT (All) 4:3
Plasma 16:9
DLP (All) 16:9
LCD (All) 16:9
Table 3: Video Display Aspect Ratio Defaults
To Next Page
Loading...