Uplink/Multiroom Link
1. Using Cat. 5e cable, properly terminated with RJ45 connectors,
connect the
Multiroom Link Terminal on the AVR21EN to
the
Uplink Terminal on the AVH21, as shown in Figure 25.
2. In larger systems using multiple hubs, complete Step 1 above by
connecting the
Multiroom Link Terminal on the AVR21EN to
the
Uplink Terminal on AVH21 #1 as shown in Figure 25.
a) Using Cat. 5e cable, properly terminated with RJ45 connectors,
connect the
Expansion/AUX KP Terminal on AVH21 #1
to the
Uplink Terminal on AVH21 #2, as shown in
Figure 25.
b) If using three hubs, connect the Expansion/AUX KP
Terminal
on AVH21 #2 to the Uplink Terminal on
AVH21 #3, as shown in
Figure 25.
Keypad Connections
1. Using Cat. 5e cable properly terminated with RJ45 connectors,
connect the cables to the appropriate KP21 keypad terminals,
KP 1-7 on the AVH21. As shown in Figure 26. Confirm
proper connection by zone (Keypad number). Improper
connection of the wrong keypad to the wrong terminal will
cause operational errors.
2. In larger systems using multiple hubs, repeat Step 1 for all keypad
connections to AVH21 #s 1, 2 and 3. Confirm all connections by
zone (keypad number) as shown in
Figure 26.
a) AVH21 #1 connects to keypads for zones 1–7
b) AVH21 #2 connects to keypads for zones 8–14
c) AVH21 #3 connects to keypads for zones 15–20.
45
Hub System
AVH21 #1
ZONES 1–7
AVH21 #2
ZONES 8–14
AVH21 #3
ZONES 15–20
STRUCTURED WIRING PANEL
CONTROL, DIGITAL AUDIO, DATA
FROM AVR21EN MULTIROOM LINK
TO AVH21 #1 UPLINK
CONTROL, DIGITAL AUDIO, DATA
FROM AVH21 #1
EXPANSION/AUX KEYPAD
TO AVH21 #2 UPLINK
CONTROL, DIGITAL AUDIO, DATA
FROM AVH21 #2
EXPANSION/AUX KEYPAD
TO AVH21 #3 UPLINK
AVR21EN
REAR PANEL
AVH21 #1
ZONES 1–7
AVH21 #2
ZONES 8–14
AVH21 #3
ZONES 15–20
STRUCTURED WIRING PANEL
CONTROL, DIGITAL AUDIO, DATA
FROM AVH21 #2 KP 8–14
TO KP21 KEYPADS 8–14
CONTROL, DIGITAL AUDIO, DATA
FROM AVH21 #3 KP 15–20
TO KP21 KEYPADS 15–20
CONTROL, DIGITAL AUDIO, DATA
FROM AVH21 #1 KP 1-7
TO KP21 KEYPADS 1-7
To Next Page
Loading...