Figure 64.
Name Sleep Groups Screen
This section names the Sleep Groups. Building the groups will be
done in a later section. To name Sleep Groups:
1. From ZONE SETUP PAGE 1, with the cursor next to NAME
SLEEP GROUPS, press the
Set Button H. The NAME
SLEEP GROUPS screen will appear (
Figure 64).
2. Press the
⁄
/
¤
Navigation Button F to position the cursor next
to
NAME. Press the
Set Button H. A white rectangle will flash
to the right of
NAME: indicating that the remote can be used
to enter the letters for the group name.
3. Using either the
⁄
/
¤
Navigation Button F or the
Alphanumeric Buttons , enter the first letter for the group
name. (e.g., Patio). When the first letter appears on screen,
press the
›
Navigation Button F to move the cursor to the
next letter position.
4. Repeat Steps 2–3 until the Sleep Group Name has been spelled
out. A Group Name can have up to 12 letters. Press the
Set
Button H
. This will store the name and return the cursor back
to the arrow next to NAME.
5. To name additional groups, press the
⁄
/
¤
Navigation Button
F
to position the cursor next to GROUP. Press the
‹
/
›
Navigation Button F to select another group.
6. Repeat Steps 2–4 until all desired Wake-up Groups have been
named. Up to eight Sleep Groups can be created.
To exit Setup, press the
Exit Button G. To continue Zone Setup,
position the cursor next to BACK TO ZONE SETUP and press
the
Set Button H. ZONE SETUP PAGE 1 will appear.
Camera Setup
Camera Setup is part of associating the different security and
zone monitor cameras with the keypads in Zone Setup. In
ZONE
SETUP BY NUMBER PAGE 2
a camera can be assigned to a
specific zone, for zone video or audio/video monitoring. In
DOOR
SETUP
, a camera can be assigned to a specific door for door
monitoring. Naming the cameras provides a reference to which
camera is connected to which
Camera Video Input on the
AVH21 Hub(s). The camera name will appear in the KP21
Keypad
Information Display
when a monitored zone or door has a
camera assigned. If
MONITOR CAM is set to YES, the camera will
be available from the
MONITOR page of the KP21 without being
assigned to a zone keypad.
Figure 65.
Camera Setup Screen
To name and monitor Cameras:
1. From ZONE SETUP PAGE 1, with the cursor next to
CAMERA SETUP, press the
Set Button H. The CAMERA
SETUP
screen will appear (
Figure 65).
2. Press the
⁄
/
¤
Navigation Button F to position the cursor
next to
CAMERA. Press the
‹
/
›
Navigation Button F to
select the Camera to be set up.
3. Press the
⁄
/
¤
Navigation Button F to position the cursor
next to NAME. Press the
Set Button H. A white rectangle will
flash to the right of NAME: indicating that the remote can be
used to enter the letters for the camera name.
4. Using either the
⁄
/
¤
Navigation Button F or the
Alphanumeric Buttons , enter the first letter for the group
name (e.g., Baby’s Room). When the first letter appears on
screen, press the
›
Navigation Button F to move the cursor
to the next letter position.
5. Repeat Steps 2–3 above until the Camera Name has been spelled
out. A Camera Name can have up to 12 letters. Press the
Set
Button
H
. This will store the name and return the cursor back
to the arrow next to
NAME.
6. Press the
⁄
/
¤
Navigation Button F to position the cursor
next to
MONITOR CAM. Press the
‹
/
›
Navigation Button F
to select YES/NO. YES indicates that the camera can be moni-
tored independently without being assigned to a keypad (Zone).
NO indicates that the camera can only be monitored by selecting
the keypad (Zone) it has been assigned to in the keypad/camera
assigned menu.
7. To set up additional cameras, press the
⁄
/
¤
Navigation Button
F
to position the cursor next to CAMERA. Press the
‹
/
›
Navigation Button F to select another camera.
8. Repeat Steps 2–4 until all desired Cameras have been set up.
Up to seven cameras can be configured, matching the number
of camera inputs on the AVH21’s.
To exit Setup, press the
Exit Button G. To continue Zone Setup,
position the cursor next to
BACK TO ZONE SETUP and press
the
Set Button H. ZONE SETUP PAGE 1 will appear.
To Next Page
Loading...