Audioaccess W.H.E.N. AVR21EN

To Next Page

To Previous Page

Specifications

Multiroom Specifications (Continued)

KP21 KEYPAD

Amplifier

I Output power: 50 Watts per channel, 20Hz – 20kHz, 8 ohms, 0.1% THD

I DSP: Texas Instruments

™

I Speaker connector: Screw-down terminals; accepts up to 14-gauge wire

I Power supply input: 26-Volt DC; four-conductor power-supply inputs for use with 14/4 wire

Dimensions

I Bezel dimensions (H x W): 4-1/2" x 4-1/2" (114mm x 114mm)

I Wall cutout and mounting depth: As per Carlon

box used

I Approved Carlon

mounting boxes: BH235A (new work, closed box);

BH234R (old work [retrofit], closed box);

SC200A (new work, open frame)

Fits in two-gang USA UL J-box

Audio Input/Output

I Source audio input: 48kHz digital audio stereo input from AVR

I Audio distribution method: Uncompressed digital audio via digital signal transfer bus over Cat. 5e

I Local analog stereo input: Line-level analog input on screw-down terminal

I Analog stereo preout: Line-level analog output on screw-down terminal

I Microphone output (paging): Built-in microphone mounted behind bezel

I IR input: Built-in IR receiver behind bezel; remote IR sensor input for use with wired IR eye,

includes 12-volt power and signal input

All features and specifications are subject to change without notice.

Audioaccess W.H.E.N. AVR21EN - KP21 KEYPAD