34
Disc 3 (DVD)
Same as Disc 1 on the previous page, except:
1. Use
Disc 3 connections for analog audio and video.
2. Use
Optical 2 for digital audio.
3. Use
Disc 3 SPF In for optional power management.
4. Use
Disc 3 DVD Changer Interface for DVD Changer 3 status.
DISC 3 (iPod)
Figure 17
iPod/aDock Connections
aDock and aDock A/V Adapter Connections
1. Connect the DB15 cable that is attached to the aDock to the
aDock A/V Adapter, as shown in
Figure 17. This will provide
power and control to the iPod and send A/V signals and
metadata to the AVR21EN.
2. Connect a DB9 cable from the
aDock A/V Adapter to the Disc 3
DVD Changer Interface Terminal
on the AVR21EN rear-panel,
as shown in
Figure 17. This will provide control to the iPod and
send A/V signals and metadata to the AVR21EN.
NOTE: With the two above connections, the AVR21EN will
”autodiscover“ the iPod and automatically configure the AVR21EN,
KP21 keypads and KP21R multiroom remotes with the appropriate
control commands for iPod. The KP21 keypads will also automati-
cally display the proper graphics for iPod menu navigation, control
and metadata only when an iPod is inserted into the aDock.
If no iPod is present, the screens will appear as a standard DVD
transport control.
3. Connect the included 12VDC Power Supply to the
aDock A/V
Adapter
and plug it into an unswitched AC Outlet after all
system connections have been made and confirmed. This will
provide power for the A/V Adapter, the aDock and the iPod.
Audio – Disc 3 (iPod)
Connect the L&R line-level audio outputs on the aDock A/V
Adapter to the
Disc 1 L&R IN Jacks on the AVR rear panel.
Video – Disc 3 (iPod)
Connect the composite video OUT on the aDock A/V Adapter to
the
Disc 1 C-Video IN on the AVR rear panel.
VR (Video Recorder)
Audio In – VR
Connect the L&R line-level audio outputs of a Video Recorder
(VCR, TiVo or DVD-R) to the
VR L&R In Jacks on the AVR
rear panel.
Audio Out – VR
Connect the VR L&R Out Jacks on the AVR rear panel to
the L&R line-level audio inputs (record) on a video recorder.
Video In – VR
NOTE 1: It is not necessary to connect both Composite and S-video.
It is necessary to have a composite video connection to distribute
video to the AVH21 hubs in multiroom applications. The
Video
Source Outputs
(multiroom video out) cannot accept compo-
nent inputs, nor are component inputs down-converted for use
with these outputs.
NOTE 2: Video will default to the highest quality signal available.
NOTE 3: When a source is connected to the AVR21EN via
component video connections, it is also necessary to connect the
composite and/or S-video outputs of the source device to the
AVR21EN if you wish to take advantage of the record outputs.
The record outputs cannot accept component inputs, nor are
component inputs down-converted for use with these outputs.
1. Connect the composite video output of a video recorder to the
VR C-VID In Jack on the AVR rear panel.
2. Connect the S-video output of a DVD/CD player to the
VR S-VID
In Jack
on the AVR rear panel.
Video Out – VR
1. Connect the VR C-VID Out Jack on the AVR rear panel to
the composite video in (record) jack on a video recorder.
2. Connect the
VR S-VID Out Jack on the AVR rear panel to
the S-video in (record) jack on a video recorder.
SPF (Power Management – Optional) – VR
NOTE: An SPF (Source Power Flag) should be used on any device
that does not have discrete IR on/off codes. Composite video
should be sensed for a video recorder. All SPF modules can be
daisy-chained together for power from a single SPF/PS power sup-
ply and must be powered to work. See the
SPF Features section.
Composite Video
1. Connect the composite video output of a video recorder to
the
Signal Input Jack on a SPF.
2. Connect the
Signal Output Jack on the SPF to the
VR C-VID IN on the AVR rear panel.
3. Connect the 3.5mm
Mini Plug Pigtail to the VR SPF In
on the AVR rear panel.
4. If using one SPF, connect the
Power Input to an Audioaccess
SPF/PS power supply. If using multiple SPFs, connect the
Power
Input
to the Power Pass-Through on the previous SPF
using the included 2.1mm jumper wire.
Main Room Installation and Setup
iPod
aDock
Power, Audio/Video
and Control
DB15 Cable from
aDock to A/V
Adapter
Composite Video From
aDock A/V Adapter to
AVR21EN Disc 3 C-Video IN
L&R Line-Level Audio
From aDock A/V Adapter to
AVR21EN Disc 3 L&R Audio IN
iPod Control In,
iPod Metadata Out,
D89 Cable from
A/V Adapter to
AVR21EN
DVD Disc Changer
Interface Disc 3
aDock A/V Adapter
AVR21EN Rear-Panel Connections
To Next Page
Loading...