Audioaccess W.H.E.N. AVR21EN - Page 88

2. Using the
‹
/
›
Navigation Button F, select the day(s) that
the group being configured is to “sleep”: Daily, Weekdays,
Weekends, Custom, Never or Today.
3. To configure a custom schedule, with the cursor next to WHEN,
press the
‹
/
›
Navigation Button F until CUSTOM appears
on screen. Press the
Set Button H. The CUSTOM SLEEP
TIME 1 screen will appear (
Figure 75).
Figure 75.
Custom Sleep Time 1
4. With the cursor positioned next to MON, press the
‹
/
›
Navigation Button F to set YES/NO. YES will have the group
sleep on Mondays, NO will not have the group sleep on Mondays.
When MON has been configured, press the
⁄
/
¤
Navigation
Button F
. Press the
¤
Navigation Button F to move to
the next day. Press the
⁄
Navigation Button F to move to
the previous day.
5. Repeat Step 4 until all days have been configured for the
Custom sleep setting. Press the
Set Button H to store the
Custom setting.
6. Use the
⁄
/
¤
Navigation Button F to position the cursor next
to GO TO SLEEP PAGE 1-1. Press the
Set Button H.
Continue Sleep Setup.
Source
This setting will determine which source the Sleep Group will
switch to. LAST will have each zone in the group switch to the last
source selected in each of those zones. LOCAL will have each zone
in the group switch to the local source connected to the
AUX-IN
on the KP21 keypad in each of those zones. Selecting
one of the common sources, Disc 1, Disc 2, Disc 3, Radio 1, Radio 2,
A/V/Aux, Video Recorder or Cable/Sat, will have all zones in the
group switch to that source.
To set Source:
1. In the SLEEP SETUP 1-1 screen, press the
⁄
/
¤
Navigation
Button F
to position the cursor next to SOURCE.
2. Using the
‹
/
›
Navigation Button F, select the source that
the group being configured is to switch to: LAST, LOCAL, DISC 1,
DISC 2, DISC 3, RADIO 1, RADIO 2, A/V/AUX, VIDEO RECORDER,
CABLE/SAT.
3. To continue Setup, press the
⁄
/
¤
Navigation Button F to
position the cursor next to GO TO SLEEP 1 PAGE 2.
Press the
Set Button H. The SLEEP SETUP 1-2 screen
will appear (
Figure 76).
* CUSTOM SLEEP TIME 1 *
NOTE: THESE SETTINGS
AFFECT THE ENTIRE GROUP
NAME: KEYPAD 1
SLEEP GROUP: NONE
MON
WED
FRI
BACK TO ZONE SETUP
SUN
GO TO PAGE 3
GO TO SLEEP PAGE 1-1
BACK TO SETUP BY NO
: YES
: YES
: YES
: YES
TUE
THU
SAT
: YES
: YES
: YES
Sleep Group
This indicates the Sleep Group being configured. Sleep Group is
not selectable in this screen. The Group is selected in the
SET-UP
BY NUMBER PAGE 3
screen on the SLEEP GROUP line.
To select a Sleep Group:
1. Press the
⁄
/
¤
Navigation Button F to position the cursor next
to
BACK TO SETUP BY NO. Press the
Set Button H.
2. In the SETUP BY NUMBER PAGE 3 screen, press the
⁄
/
¤
Navigation Button F to position the cursor next to SLEEP
GROUP.
3. Using the
‹
/
›
Navigation Button F, select the group to be
configured:
1, 2, 3, 4, 5, 6, 7, 8.
4. Press the
⁄
/
¤
Navigation Button F to position the cursor next
to
SET SLEEP TIMES. Press the
Set Button H.
Sleep Time
This setting assigns the time that the group being configured will
turn off. This setting affects all zones in the group.
To set Sleep Time:
1. In the SLEEP SETUP 1-1 screen, press the
⁄
/
¤
Navigation
Button
F
to position the cursor next to SLEEP TIME 1.
Press the
Set Button H. The HOUR field will start to flash.
2. Using the
⁄
/
¤
Navigation Button F, select the HOUR that the
group being configured is to turn OFF.
3. Press the
›
Navigation Button F. The MINUTE field will start
to flash.
4. Using the
⁄
/
¤
Navigation Button F, select the MINUTE that
the group being configured is to turn OFF.
5. Press the
›
Navigation Button F. The AM/PM field will start
to flash.
6. Using the
⁄
/
¤
Navigation Button F, select AM or PM for the
turn-off time for the group being configured.
Press the
Set Button H to store the Sleep Time.
Shut Down
This setting determines how long the Sleep Group will stay on. The
range is 5–90 minutes in five-minute increments, with an additional
option of
INSTANT, which will turn a zone off, if on, when the
Sleep Time for that group is reached.
To set Shut Down:
1. In the SLEEP SETUP 1-1 screen, press the
⁄
/
¤
Navigation
Button
F
to position the cursor next to SHUT DOWN.
2. Using the
‹
/
›
Navigation Button F, set the length of time in
minutes that the group being configured is to stay on after the
configured
SLEEP TIME. Select INSTANT to immediately
turn the group off when the Sleep Time has been reached.
When
This setting will configure which day or days of the week the group
being configured will “sleep.” Sleep can be set for Daily, Weekdays,
Weekends, Custom, Never or Today. The Custom setting allows
selecting the specific days of the week that a group is to “sleep.”
To configure When:
1. In the SLEEP SETUP 1-1 screen, press the
⁄
/
¤
Navigation
Button
F
to position the cursor next to WHEN.
88
Zone Setup