405HD IP Phone for Microsoft Skype for Business
User's Manual 36 Document #: LTRT-12044
6.6 Setting Date and Time
Date and time is automatically retrieved from the deployed Network Time Protocol (NTP) server,
enabled by your administrator.
To enable the NTP server:
1. Access the Date and Time screen (MENU key > Settings > Date and Time).
2. If not already 'Enabled', notify your network administrator.
To configure the Time Zone:
1. Navigate to the Time zone option and press the Select softkey.
2. Navigate to and select the time zone relevant to your geographical location. See Table 6-1
below for a list of all Time Zone options.
To configure the time format:
1. Navigate to the Time format option and press the Select softkey.
2. Navigate to the format of your choice and press the Select softkey.
Note: To configure the NTP server, see the Administrator’s Manual.
To configure the date format:
1. Navigate to the Date format option and press the Select softkey.
2. Navigate to the date format of your choice and press the Select softkey.
To Next Page
Loading...
