AudioCodes 405HD - Dialing

405HD IP Phone for Microsoft Skype for Business
User's Manual 58 Document #: LTRT-12044
7.2.1 Dialing
This section shows how to dial. To dial, either (1) key-in the number on the keypad (2) press the
speaker key and enter the number (3) press the speaker key or lift the handset and enter a URL
address (e.g., host and domain name, or IP address) or alphabetical letters (e.g., tvservice).
 To dial a regular-digits phone number:
1. On the keypad, key the first digit of a regular phone number; the screen displays the digit in
the NEW CALL field; key in the remaining digits. To delete (from right to left) entered digits,
press the Clear softkey. To cancel the call, press the Cancel softkey.
2. Do any of the following:
• Don't do anything; dialling is automatically performed after a few seconds.
• Press the Dial softkey; dialing is performed.
• Pick up the receiver; dialing is performed.
• Press the Speaker button; dialing is performed.
• Press # (if you switched on speaker/handset/headset before keying in the digits of the
phone number); dialing is performed.
 To dial a URL:
1. Press the speaker key or lift the handset; the screen displays the NEW CALL field and the
URL softkey:
2. Press the URL softkey and enter a URL address (see Section 4.4 for information on how to
switch between letters, numerals and symbols). To delete (from right to left) entered
letters/numerals/symbols, press the Clear softkey. To cancel the call, press the Cancel
softkey.
3. Press the Dial softkey.