450HD IP Phone
User's Manual 38 Document #: LTRT-14820
5.2 Selecting Ring Tone
You can choose from a selection of ring tones to indicate incoming calls .
To select a ring tone:
1. Open the Ring Tone screen (MENU hard key > Settings > Ring Tone).
2. Navigate to and select a ring tone. A sample of each ring tone is played as you navigate
through the list.
3. Set ring tone volume by pressing the VOL or VOL
key:
A few seconds after adjusting the volume level the Ringer Volume indication is hidden.
4. Touch the Select softkey to apply your settings.
5. Touch the Save softkey to save your settings.
To Next Page
Loading...
