AudioCodes 450HD - Dialing

450HD IP Phone
User's Manual 78 Document #: LTRT-14820
6.2.1 Dialing
This section shows how to dial. To dial, either (1) key-in the number on the keypad (2) press the
speaker key and enter the number (3) press the speaker key or lift the handset and enter a URL
address (e.g., host and domain name, or IP address) or alphabetical letters (e.g., tvservice).
 To dial a regular-digits phone number:
1. On the keypad, key the first digit of a regular phone number; the touch screen displays the
digit in the New Call field; key in the remaining digits. To delete (from right to left) entered
digits, touch the Clear softkey. To cancel the call, touch the Cancel softkey.
2. Do any of the following:
• Don't do anything; dialling is automatically performed after a few seconds.
• Touch the Dial softkey; dialing is performed.
• Pick up the receiver; dialing is performed.
• Press the Speaker key; dialing is performed.
• [If you switched on speaker/headset before keying in the number] Press the # hard key
on the phone after keying in the number, to dial the number immediately.
 To dial a URL:
1. Press the speaker key or lift the handset; the touch screen displays the New Call field and
the URL softkey:
2. Touch the URL softkey and enter a URL address.
• See Section 3.4 for how to switch letters, numerals and symbols.
• To delete (from right to left) entered letters/numerals/symbols, touch the Clear softkey.
• To cancel the call, touch the Cancel softkey.