450HD IP Phone
User's Manual 66 Document #: LTRT-14820
5.16.1 Configuring Pause Dialing for a Speed Dial to an Ext. behind an IVR
Your network administrator can configure pause dialing for a Speed Dial, in order to create a time
break. This is typically requried for a Speed Dial which dials a destination extension number that
is behind an Interactive Voice Response (IVR) system.
Note: Consult your network administrator if you need a pause dialing configured for a Speed
Dial. See the Administrator's Manual for more information.
5.16.2 Deleting a Speed Dial
To delete a Speed Dial:
1. Long-press the Speed Dial displayed in the touch screen ('Hilary' in the previous example).
2. Press the navigation control’s left or right rim to navigate to and select Empty:
3. You're returned to the idle touch screen; the Speed Dial is removed:
To Next Page
Loading...
