AudioCodes 450HD - Selecting an Answering Device

450HD IP Phone
User's Manual 46 Document #: LTRT-14820
5.8 Selecting an Answering Device
You can select which audio device (speaker or headset) is activated when you answer calls (by
pressing the Accept softkey or lifting the handset) or when you dial calls (by pressing the number
keys on the keypad and then pressing the Dial softkey).
The default device is the speaker.
 To select the answering device:
1. Open the Answer Device screen (MENU hard key > Settings > Answer Device).
2. Navigate to and select the device (Speaker or Headset) and touch the Select softkey.
3. Touch the Save softkey.