EasyManua.ls Logo

AudioCodes Mediant 1000

AudioCodes Mediant 1000
1195 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
User's Manual 1100 Document #: LTRT-27045
Mediant 1000B Gateway & E-SBC
Parameter Description
operadora-con-
intervencion / telco-
operator-handled-
call
n/a II-5 n/a
prison 29 n/a n/a
hotel 66 n/a n/a
cellular-roaming 63 n/a n/a
Note: This feature is applicable only to the NI-2 PRI and E1 MFC-R2 variants.
Calling Party Category Mode
cpc-mode
[CallingPartyCategoryMode]
Defines the regional Calling Party Category (CPC) mapping variant
between SIP and PSTN for MFC-R2.
[0] None (default)
[1] Brazil R2
[2] Argentina R2
Note:
To enable CPC mapping, set the EnableCallingPartyCategory
parameter to 1.
The parameter is applicable only to the E1 MFC-R2 variant.
usr2usr-hdr-frmt
[UserToUserHeaderFormat]
Defines the interworking between the SIP INVITE's User-to-User
header and the ISDN User-to-User (UU) IE data.
[0] = (Default) SIP header format: X-UserToUser.
[1] = SIP header format: User-to-User with Protocol Discriminator
(pd) attribute (according to IETF Internet-Draft draft-johnston-
sipping-cc-uui-04). For example:
User-to-
User=3030373435313734313635353b313233343b3834;pd=
4
[2] = SIP header format: User-to-User with encoding=hex at the
end and pd embedded as the first byte (according to IETF
Internet-Draft draft-johnston-sipping-cc-uui-03). For example:
User-to-
User=043030373435313734313635353b313233343b3834;
encoding=hex
where "04" at the beginning of this message is the pd.
[3] = Interworks the SIP User-to-User header containing text
format to ISDN UUIE in hexadecimal format, and vice versa. For
example:
SIP Header in text format:
User-to-User=01800213027b712a;NULL;4582166;
Translated to hexadecimal in the ISDN UUIE:
303138303032313330323762373132613b4e554c4c3b34353
8323136363b
The Protocol Discriminator (pd) used in UUIE is "04" (IUA
characters).
Note: The parameter is applicable for Tel-to-IP and IP-to-Tel calls.
Remove CLI when Restricted
rmv-cli-when-restr
[RemoveCLIWhenRestricted]
Determines (for IP-to-Tel calls) whether the Calling Number and
Calling Name IEs are removed from the ISDN Setup message if the
presentation is set to Restricted.
[0] No = (Default) IE's are not removed.
[1]
Yes = IE's are removed.

Table of Contents

Other manuals for AudioCodes Mediant 1000

Related product manuals