AudioCodes Mediant 1000 User Manual

Version 7.2 811 Mediant 1000B Gateway & E-SBC
User's Manual 50. Viewing Performance Monitoring
50 Viewing Performance Monitoring
This section describes how to view performance monitoring in the device's Web interface.
50.1 Viewing Trunk Utilization
You can view the number of active channels per trunk over time in the Web interface's
Trunk Utilization page. The page displays a graph, where the x-axis indicates the time
(hh:mm:ss) and the y-axis the number of active trunk channels.
Note:
• The Trunk Utilization page is applicable only to the Gateway application.
• To view the graph, your device must be connected to and configured with trunks.
• To view the graph, you must first disable the SBC application.
• If you navigate to a different page, the data displayed on the graph and all its
settings are cleared.
 To view the number of active trunk channels:
1. Open the Trunk Utilization page (Monitor menu > Monitor tab > Performance
Monitoring folder > Trunk Utilization).
Figure 50-1: Viewing Trunk Utilization
2. From the 'Trunk' drop-down list, select the trunk for which you want to view active
channels.

AudioCodes Mediant 1000 Specifications

General

Data link protocols	CAS: MF-R1: T1 CAS, ISDN PRI: ETSI/EURO ISDN, ANSI NI2, QSIG
Security algorithms	HTTPS, SRTP
Authentication method	RADIUS
Internal memory	512 MB
Built-in processor	Celeron 600 MHz
Processor frequency	600 MHz
Internal memory type	-
Number of processors installed	1
Voice codecs	G.711, G.723.1, G.726, G.729A, iLBC
Safety	UL60950-1, FCC 47 CFR
Certification	ETS 300019-2-1, ETS 300019-2-2 ETS 300019-2-3
Mounting type	Rack mounting
LED indicators	Yes
Power requirements	90-260 V AC

Weight and Dimensions

Size (imperial)	19 \