AudioCodes Mediant 1000 User Manual

Version 7.2 577 Mediant 1000B Gateway & E-SBC
User's Manual 27. Analog Gateway
27 Analog Gateway
This section describes configuration of analog settings.
27.1 Configuring Keypad Features
The Keypad Features page lets you configure key sequences that can be pressed on
telephone keypads of FXS endpoints to activate and deactivate the following features:

Call Forward

Caller ID Restriction

Hotline for automatic dialing

Call Waiting

Rejection of Anonymous Calls
Note:
• The Keypad Features page is applicable only to FXS interfaces.
• The method used by the device to collect dialed numbers is identical to the
method used during a regular call (i.e., max digits, interdigit timeout, digit map,
etc.).
• The activation of each feature remains in effect until it is deactivated (i.e., not
deactivated after a call).
• For a description of the keypad parameters, see ''Telephone Keypad Sequence
Parameters'' on page 1124.
 To configure keypad sequences:
1. Open the Keypad Features page (Setup menu > Signaling & Media tab > Gateway
folder > Analog Gateway > Keypad Features).
Figure 27-1: Configuring Phone Key Sequences to Activate Various Services

AudioCodes Mediant 1000 Specifications

General

Data link protocols	CAS: MF-R1: T1 CAS, ISDN PRI: ETSI/EURO ISDN, ANSI NI2, QSIG
Security algorithms	HTTPS, SRTP
Authentication method	RADIUS
Internal memory	512 MB
Built-in processor	Celeron 600 MHz
Processor frequency	600 MHz
Internal memory type	-
Number of processors installed	1
Voice codecs	G.711, G.723.1, G.726, G.729A, iLBC
Safety	UL60950-1, FCC 47 CFR
Certification	ETS 300019-2-1, ETS 300019-2-2 ETS 300019-2-3
Mounting type	Rack mounting
LED indicators	Yes
Power requirements	90-260 V AC

Weight and Dimensions

Size (imperial)	19 \