AudioCodes Mediant 1000

User's Manual 176 Document #: LTRT-27045
Mediant 1000B Gateway & E-SBC
Where SI is the SIP Interface and NI is the network interface.
The device also sends IDS notifications and alarms in Syslog messages to a Syslog
server. This occurs only if you have configured Syslog (see ''Enabling Syslog'' on page
892). An example of a Syslog message with IDS alarms and notifications is shown below:
Figure 13-9: Syslog Message Example with IDS Alarms and Notifications
The table below lists the Syslog text messages per malicious event:
Table 13-6: Types of Malicious Events and Syslog Text String
Reason Description Syslog String
Connection
Abuse
TLS authentication failure abuse-tls-auth-fail
Malformed
Messages
 Message exceeds a user-defined maximum
message length (50K)
 Any SIP parser error
 Message policy match
 Basic headers not present
 Content length header not present (for TCP)
 Header overflow
 malformed-invalid-
msg-len
 malformed-parse-error
 malformed-message-
policy
 malformed-miss-
header
 malformed-miss-
content-len
 malformed-header-
overflow
Authentication
Failure
 Local authentication ("Bad digest" errors)
 Remote authentication (SIP 401/407 is sent if
original message includes authentication)
 auth-establish-fail
 auth-reject-response
Dialog
Establishment
Failure
 Classification failure
 Routing failure
 Other local rejects (prior to SIP 180 response)
 Remote rejects (prior to SIP 180 response)
 Malicious signature pattern detected
 establish-classify-fail
 establish-route-fail
 establish-local-reject
 establish-remote-
reject
 establish-malicious-
signature-db-reject
Abnormal Flow
 Requests and responses without a matching
transaction user (except ACK requests)
 Requests and responses without a matching
transaction (except ACK requests)
 flow-no-match-tu
 flow-no-match-
transaction