EasyManua.ls Logo

AudioCodes Mediant 1000

AudioCodes Mediant 1000
1195 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Version 7.2 685 Mediant 1000B Gateway & E-SBC
User's Manual 34. SBC Manipulations
Parameter Description
Additional Manipulation
is-additional-manipulation
[IPOutboundManipulation_IsA
dditionalManipulation]
Determines whether additional manipulation is done for the table
entry rule listed directly above it.
[0] No = (Default) Regular manipulation rule -
not done in addition
to the rule above it.
[1] Yes = If the previous table row entry rule matched the call,
consider this row entry as a match as well and perform the
manipulation specified by this rule.
Note: Additional manipulation can only be done on a different item
(source URI, destination URI, or calling name) to the rule configured
in the row above (configured by the 'Manipulated URI' parameter).
Call Trigger
trigger
[IPOutboundManipulation_Trig
ger]
Defines the reason (i.e., trigger) for the re-routing of the SIP request:
[0] Any = (Default) Re-routed for all scenarios (re-routes and non-
re-routes).
[1] 3xx = Re-routed if it triggered as a result of a SIP 3xx
response.
[2] REFER = Re-routed if it triggered as a result of a REFER
request.
[3] 3xx or REFER = Applies to options [1] and [2].
[4] Initial only = Regular requests that the device forwards to a
destination. In other words, re-routing of requests triggered by the
receipt of REFER or 3xx does not apply.
Match
Request Type
request-type
[IPOutboundManipulation_Re
questType]
Defines the SIP request type to which the manipulation rule is
applied.
[0] All = (Default) all SIP messages.
[1] INVITE = All SIP messages except REGISTER and
SUBSCRIBE.
[2] REGISTER = Only SIP REGISTER messages.
[3] SUBSCRIBE = Only SIP SUBSCRIBE messages.
[4] INVITE and REGISTER = All SIP messages except
SUBSCRIBE.
[5] INVITE and SUBSCRIBE = All SIP messages except
REGISTER.
Source IP Group
src-ip-group-name
[IPOutboundManipulation_Src
IPGroupName]
Defines the IP Group from where the INVITE is received.
The default value is Any (i.e., any IP Group).
Destination IP Group
dst-ip-group-name
[IPOutboundManipulation_De
stIPGroupName]
Defines the IP Group to where the INVITE is to be sent.
The default value is Any (i.e., any IP Group).
Source Username Prefix
src-user-name-prefix
[IPOutboundManipulation_Src
UsernamePrefix]
Defines the prefix of the source SIP URI user name, typically used in
the SIP From header.
The default value is the asterisk (*) symbol (i.e., any source
username prefix). The prefix can be a single digit or a range of digits.
For available notations, see ''Dialing Plan Notation for Routing and
Manipulation'' on page
923.

Table of Contents

Other manuals for AudioCodes Mediant 1000

Related product manuals