Version 7.2 771 Mediant 1000B Gateway & E-SBC
User's Manual 43. Software Upgrade
7. Click Load File; the device begins to install the .cmp file and a progress bar displays
the status of the loading process:
Figure 43-15: CMP File Loading Progress Bar
When the file is loaded, a message is displayed to inform you.
8. To load additional files, use the Next and Back buttons to navigate through the wizard
to the desired file-load wizard page; otherwise, skip to the next step to load the .cmp
file only.
The wizard page for loading an ini file lets you do one of the following:
• Load a new ini file:
a. Click Browse, and then navigate to and select the new ini file.
b. Click Load File; the device loads the ini file.
• Restore configuration to factory defaults: Clear the 'Use existing configuration'
check box.
• Retain the existing configuration (default): Select the 'Use existing
configuration' check box.
Figure 43-16: Load an INI File in the Software Upgrade Wizard
To Next Page
Loading...
