AudioCodes Mediant 1000

Version 7.2 803 Mediant 1000B Gateway & E-SBC
User's Manual 47. System Status
Tab Field Description
established.
Call Type Type of call:
 "Voice": Voice call
 "Fax": Fax call
Call Destination IP address of called party.
Coder Coder type used for the call.
Last Current Disconnect Duration Duration of the disconnect signal.
Note: The parameter is applicable only to analog
interfaces.
Line Current Line current (in mA).
Note: The parameter is applicable only to analog
interfaces.
Line Voltage Line voltage (in V).
Note: The parameter is applicable only to analog
interfaces.
Hook Status of phone:
 "0": On hook
 "1": Off hook
Note: The parameter is applicable only to analog
interfaces.
Ring Status of ringing:
 "0": Off
 "1": On
Note: The parameter is applicable only to analog
interfaces.
Line Connected Line status:
 "0": Disconnected
 "1": Connected
Note: The parameter is applicable only to analog
interfaces.
Polarity state Port polarity:
 "0": Normal
 "1": Reversed
 "2": N\A
Note: The parameter is applicable only to analog
interfaces.
Line polarity Line polarity:
 "0": Positive
 "1": Negative
Note: The parameter is applicable only to analog
interfaces.
Message Waiting Indication MWI status:
 "0": Off