AudioCodes Mediant 1000 - Page 874

User's Manual 874 Document #: LTRT-27045
Mediant 1000B Gateway & E-SBC
For a detailed description of the parameters, see ''RADIUS Parameters'' on page
1178.
Figure 54-16: Configuring RADIUS Accounting
3. Click Apply, and then reset the device with a save-to-flash for your settings to take
effect.
The table below lists the RADIUS Accounting CDR attributes included in the
communication packets transmitted between the device and a RADIUS server.
Table 54-9: Supported RADIUS Accounting CDR Attributes
Attribute
ID
Attribute
Name
Vendor-
Specific
Attribute
(VSA) ID
Description
Value
Format
Example AAA
Request Attributes
1 user-name (Standard) Account number or
calling party
number or blank
String
up to 15
digits
long
5421385747 Start
Acc
Stop
Acc
4 nas-ip-address (Standard) IP address of the
requesting device
Numeric 192.168.14.43 Start
Acc
Stop
Acc
6 service-type (Standard) Type of service
requested
Numeric 1: login Start
Acc
Stop
Acc
26 h323-
incoming-conf-
id
1 SIP call identifier Up to
32
octets
h323-incoming-
conf-id=38393530
Start
Acc
Stop
Acc
26 h323-remote-
address
23 IP address of the
remote gateway
Numeric - Stop
Acc
26 h323-conf-id 24 H.323/SIP call
identifier
Up to
32
octets
Start
Acc
Stop
Acc
26 h323-setup-
time
25 Setup time in NTP
format 1
String h323-setup-
time=09:33:26.621
Mon Dec 2014
Start
Acc
Stop
Acc
26 h323-call-
origin
26 Originator of call:
 "answer": Call
originated from
String h323-call-
origin=answer
Start
Acc
Stop