AudioCodes Mediant 1000 - Page 876

User's Manual 876 Document #: LTRT-27045
Mediant 1000B Gateway & E-SBC
Attribute
ID
Attribute
Name
Vendor-
Specific
Attribute
(VSA) ID
Description
Value
Format
Example AAA
incoming leg
(SBC)
26 terminator 37 Terminator of the
call:
 "answer": Call
originated from
the IP side
(Gateway) or
incoming leg
(SBC)
 "originate": Call
originated from
the Tel side
(Gateway) or
outgoing leg
(SBC)
String terminator=originate
Stop
Acc
30 called-station-
id
(Standard) Called (destination)
phone number
(Gateway call) or
Destination URI
(SBC call)
String 8004567145 Start
Acc
31 calling-station-
id
(Standard) Calling Party
Number (ANI)
(Gateway call) or
Source URI (SBC
call)
String 5135672127 Start
Acc
Stop
Acc
40 acct-status-
type
(Standard) Account Request
Type - start (1) or
stop (2)
Note: ‘start’ isn’t
supported on the
Calling Card
application.
Numeric
1 Start
Acc
Stop
Acc
41 acct-delay-
time
(Standard) No. of seconds
tried in sending a
particular record
Numeric
5 Start
Acc
Stop
Acc
42 acct-input-
octets
(Standard) Number of octets
received for that
call duration (for
SBC calls,
applicable only if
media anchoring)
Numeric
- Stop
Acc
43 acct-output-
octets
(Standard) Number of octets
sent for that call
duration (for SBC
calls, applicable
only if media
anchoring)
Numeric
- Stop
Acc