AudioCodes Mediant 1000

User's Manual 960 Document #: LTRT-27045
Mediant 1000B Gateway & E-SBC
Parameter Description
cache, register-unregister, and start-stop trunk. In the Web, these
actions are typically done by clicking a button (e.g., the LOCK
button).
Note: For the ini file parameter, enclose values in single quotation
marks, for example: ActivityListToLog = 'pvc', 'afl', 'dr', 'fb', 'swu',
'ard', 'naa', 'spc'.
[EnableParametersMonitoring] Enables the monitoring, through Syslog messages, of parameters
that are modified on-the-fly.
 [0] = (Default) Disable

[1]
= Enable
isdn-facility-trace
[FacilityTrace]
Enables ISDN traces of Facility Information Elements (IE) for ISDN
call diagnostics. This allows you to trace all the parameters
contained in the Facility IE and view them in the Syslog.
 [0] Disable (default)
 [1] Enable
Note: For this feature to be functional, the GWDebugLevel
parameter must be enabled (i.e., set to at least level 1).
Debug Recording Destination
IP
configure troubleshoot >
logging settings > dbg-rec-
dest-ip
[DebugRecordingDestIP]
Defines the IP address of the server for capturing debug recording.
Debug Recording Destination
Port
configure troubleshoot >
logging settings > dbg-rec-
dest-port
[DebugRecordingDestPort]
Defines the UDP port of the server for capturing debug recording.
The default is 925.
Enable Core Dump
[EnableCoreDump]
Enables the automatic generation of a Core Dump file upon a device
crash.
 [0] Disable (disable)
 [1] Enable
Core Dump Destination IP
[CoreDumpDestIP]
Defines the IP address of the remote server where you want the
device to send the Core Dump file.
By default, no IP address is defined.
Logging Filters Table
Logging Filters Table
configure troubleshoot >
logging logging-filters
[LoggingFilters]
The table defines log filtering rules for Syslog messages and debug
recordings.
The format of the ini file table parameter is:
[ LoggingFilters ]
FORMAT LoggingFilters_Index = LoggingFilters_FilterType,
LoggingFilters_Value, LoggingFilters_LogDestination,
LoggingFilters_CaptureType, LoggingFilters_Mode;
[ \LoggingFilters ]
For a detailed description of the table, see ''Configuring Log Filter
Rules'' on page 881.