AudioCodes Mediant 4000 SBC - Page 105

CHAPTER8 SNMP-Based Management
Mediant 4000 SBC | User's Manual
Parameter Description
✔ To suppress the sending of a
specific alarm severity: If the
alarm has multiple severity
levels (based on conditions),
configure the 'Original
Severity' parameter to the
severity that you don't want
the device to send. For
example, if you don't want the
device to send the
acProxyConnectionLost
alarm when its' severity is
Minor, configure the 'Original
Severity' parameter to Minor.
■ [1] Indeterminate (default)
■ [2] Warning
■ [3] Minor
■ [4] Major
■ [5] Critical
- 72 -